EXPERIMENTAL ASSESSMENT OF THE STRENGTH CHARACTERISTICS OF LATERITIC SOIL STABILIZED WITH SAWDUST ASH AND PLANTAIN PEEL ASH
DOI:
https://doi.org/10.5281/zenodo.23292894Keywords:
California Bearing Ratio, lateritic soil, optimum moisture content, plantain peel ash, sawdust ash.Abstract
Lateritic soils constitute important construction materials for highways, embankments, foundations, airfields, and earth-retaining structures across Nigeria. Nevertheless, some lateritic deposits possess inadequate engineering characteristics that may result in pavement distress, excessive settlement, erosion, slope instability, and seepage-related problems. Improving the engineering properties of such soils through stabilization is therefore essential for achieving satisfactory structural performance and durability. This study examined the effectiveness of sawdust ash (SDA) and plantain peel ash (PPA) as sustainable stabilizing materials for improving the engineering properties of lateritic soil classified as AASHTO A-2-6. The soil was treated using four SDA contents of 3%, 6%, 9%, and 12%, while PPA was maintained at a constant proportion of 6%. Laboratory investigations were undertaken to determine the moisture content, particle-size distribution, Atterberg limits, compaction characteristics, and California Bearing Ratio (CBR) of the untreated and stabilized soil specimens. The results demonstrated that the incorporation of SDA and PPA altered the index and strength characteristics of the lateritic soil. The Maximum Dry Density (MDD) varied non-linearly with increasing SDA content, reaching its maximum value of 1.875 Mg/m³ at 9% SDA + 6% PPA, compared with 1.780 Mg/m³ for the natural soil. The Optimum Moisture Content (OMC) similarly varied from 11.8% to 12.8% among the stabilized mixtures. The 48-hour soaked CBR increased from 10.8% for the untreated soil to a maximum of 17.6% at 9% SDA + 6% PPA. The results indicate that the combined stabilizers improved the load-bearing capacity of the lateritic soil, although performance declined when SDA content was increased beyond the optimum level. The 9% SDA + 6% PPA combination produced the most favourable overall performance and satisfied the stated minimum CBR requirement for subgrade applications. The study demonstrates that SDA and PPA can provide useful and environmentally sustainable alternatives for improving weak lateritic soils while promoting the beneficial reuse of agricultural and wood-processing wastes in geotechnical engineering.
References
Amu, O. O., & Adetuberu, A. A. (2010). Characteristics of bamboo leaf ash stabilization on lateritic soil in highway construction. International Journal of Engineering and Technology, 2(4), 212–219.
Bello, A. A., Ige, J. A., & Ayodele, H. (2015). Stabilization of lateritic soil with cassava peels ash. British Journal of Applied Science and Technology, 7(6), 642–650.
British Standards Institution. (1990). BS 1377: Methods of test for soils for civil engineering purposes. British Standards Institution, London.
British Standards Institution. (1990). BS 1924: Methods of testing stabilized soils. British Standards Institution, London.
Dowling, J. W. F. (1966). The mode of occurrence of laterites in Northern Nigeria and their appearance in aerial photography. Engineering Geology, 1(3), 221–233.
Eberemu, A. O. (2011). Consolidation properties of compacted lateritic soil treated with rice husk ash. Geomaterials, 1, 70–78.
Etim, R. K., Eberemu, A. O., & Osinubi, K. J. (2017). Stabilization of black cotton soil with lime–iron ore tailings admixture. Journal of Transportation Geotechnics, 10, 85–95.
George, M., & Oriola, F. (2010). Groundnut shell ash stabilization of black cotton soil. Electronic Journal of Geotechnical Engineering, 15, 415–428.
Gidigasu, M. D. (1976). Laterite soil engineering: Pedogenesis and engineering principles. Elsevier Scientific, New York.
Habeeb, A. Q., Olabambo, A. A., & Olafusi, O. S. (2012). Investigation of the geotechnical engineering properties of laterite as a subgrade and base material for road construction in Nigeria. Civil and Environmental Research, 2(8), 23–31.
Ishola, K. (2014). Modification of laterite soil with iron ore tailing. Unpublished M.Sc. Thesis, Department of Civil Engineering, Ahmadu Bello University, Zaria.
Koteswara Rao, D., Anusha, M., Pranav, P. R. T., & Venkatesh, G. (2012). A laboratory study on stabilization of marine clay using sawdust ash and lime. International Journal of Engineering Science, 2(4), 851–862.
Krishma, R. R. (1997). Use of glass cullet as backfill material for retaining structures. University of Illinois, Chicago, U.S.A., 5–8.
Kumar, B., & Puri, N. (2013). Stabilization of weak pavement subgrades using cement kiln dust. International Journal of Civil Engineering and Technology, 1(4), 26–37.
Moses, G. (2008). Stabilization of black cotton soil with ordinary Portland cement using bagasse ash as admixture. IRJI Journal of Research in Engineering, 5(3), 107–115.
Moses, G., & Folagbade, O. (2010). Groundnut shell ash stabilization of black cotton soil. Electronic Journal of Geotechnical Engineering, 15, 415–428.
Nigerian General Specifications. (1997). Roads and bridges. Federal Ministry of Works, Abuja, Nigeria.
Osinubi, K. J., & Stephen, T. A. (2006). Effect of curing period on bagasse ash stabilized black cotton soil. In Proceedings of the Bi-monthly Meetings/Workshop, Materials Society of Nigeria, Zaria, pp. 1–8.
Osinubi, K. J., Yohanna, P., & Eberemu, A. O. (2015). Cement modification of tropical black clay using iron ore tailing as admixture. Journal of Transportation Geotechnics, 5, 35–49.
Phanikumar, B. R., & Sharma, R. S. (2004). Effect of fly ash on engineering properties of expansive soil. Journal of Geotechnical and Geoenvironmental Engineering, 130(7), 764–767.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 S. O. Subair, A. O. Yusuf, A. A. Olododo (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright. Licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. https://creativecommons.org/licenses/by/4.0/ (CC BY 4.0 deed)